OXY : Flex Oxygen Analyser
Product Descriptions
The OXY-Flex Oxygen Analyzer is suitable for measuring in oxygen closed systems, such as ventilation pipes and boiler exhaust flues.
The OXY-Flex Oxygen Analyzer is designed to measure the oxygen concentration in air or gas mixtures with temperatures of -100 to 400⁰C. The oxygen analyzer employs a well proven, small zirconium dioxide based element at its heart and due to its innovative design does not require a reference gas. The oxygen sensor element is mounted in the tip of the stainless steel probe and is protected by a sintered stainless steel cap.
The OXY-Flex Oxygen Analyzer uses a unique closed loop measurement system. While the sensor continuously measures the oxygen level, a heartbeat signal is also generated providing an immediate warning of any failures.
The OXY-Flex can be configured to output measuring ranges of 0-25% O₂ or 0-100% O₂. The entire measurement range is linear in both cases. The outputs can be configured to either 4-20mA and 0-10Vdc outputs or an RS232 serial communications interface.
Typical applications include; combustion control of industrial boilers, burning oil, gas, coal or biomass; incubators; composting probes and welding equipment.
FEATURES
– Zirconium dioxide technology
– High accuracy linear output
– Configurable outputs; 4-20mA and 0-10Vdc or RS232 comms interface
– Selectable output measuring ranges; 0-25% O₂ or 0-100% O₂ or fully adjustable via RS232
– Can be calibrated in fresh air (20.7% O₂) or in any other known O₂ concentration
– Housed in a sealed die-cast aluminium housing with attached oxygen sensor probe and amphenol Ecomate connector
– Works at temperatures from -100 to 400⁰C
– Various probe lengths available
BENEFITS
– Long life, non-depleting technology
– No reference gas required creating the ability to measure a wide oxygen range
– Removes the need for customers to implement their own electronics
– No need for temperature stabilisation
– Linear output signal
– Externally triggered automatic or manual single point calibration removing any effect of barometric pressure
– Can be used in high pressure and temperature environments
– No need for external heater supply
– Full technical and application support available
