Gastec GV-110 Deluxe Pump Kit
Product Descriptions
The Gastec® GV110 Piston Pump offers simple, accurate syringe-like technology for gas and vapor measurements. Designed for use with Gastec grab sample detector tubes, the piston can draw 100 ml of air at full-stroke or 50 ml of air at half-stroke. GV-110 Deluxe Pump Kit includes GV-110 piston pump with flow finish indicator, stroke counter, thermal ring, semi-rigid carry case with strap, lubricant, and 3 tube holder O-rings
Key features
• On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time
• Easy-to-check direct reading possible due to the calibrated scale directly printed on the tube
• An extensive measuring range can be obtained by adjusting the sampling volume
• Long shelf-life with excellent long-term stability
Gastec grab sample detector tubes
A variety of color detector tubes and gas detection equipment such as Benzene, Formaldehyde, Acetic Acid, Ozone, and Chlorine etc. Gastec tubes are factory calibrated to the specific flow dynamic of Gastec pumps for a grab sampling system you can trust.
Gas Sampling Pump Features |
• Built-in tip breaker to make tip breaking much easier, safer and convenient.
• Designed with a smaller diameter so that the handle can be pulled out with even less effort.
• GV-110 pump meets the leakage test of EN1231
• The full-stroke (100mL) and the half-stroke (50mL) positions are marked on the pump shaft
• The automatic stroke counter built in GV-110 pump
• The attached flow finish indicator
Operating procedures (Simple 3-step measuring) |
1. Break off both ends of the detector tube. Insert the tube into the rubber inlet.
2. Pull out the handle until it is locked. Wait until the sampling time has elapsed.
3. Read the measurement at the end of the coloured layer.
